Bullnose Boards 150mm now available in Australia! - Misc. AU
Bullnose Boards 150mm now available in Australia!

Bullnose Boards 150mm now available in Australia!

Introducing the latest additition to the Millboard Decking range, 150mm Wide Bullnose Boards!

Words by Millboard Decking

Introducing the latest additition to the Millboard Decking range, 150mm Wide Bullnose Boards! These are a wider version of the 50mm Bullnose Edging (now only available as flexible profile) and are perfect for leading stair treads, mitred borders and bench seating!

Accessories

Durafix®

Durafix®

Millboard's unique, hidden decking fixings make installing Millboard decking simple. There is no pre-drilling, countersinking, or clip fixings needed – all you need to do is screw them in. Once they’re in, the Lastane® coating material on every Millboard board simply flexes back over the screw, leaving a virtually indistinguishable mark and creating a cleaner finish. Made from stainless steel, the screws have a self-cutting tip, and a six-point Torx head and are waxed for ease of use. And the drill bits are even included in the box.

Reference codes

4.5 Gauge 60mm DuraFix® Stainless Steel (box of 250): MILFX60 - For Treated Pine Joists
4.5 Gauge 45mm DuraFix® Stainless Steel (box of 250): MILFX45 - For Hardwood Joists

*Approx number required – 22 fixings per decking board and 18 per edging/fascia board for a residential project with max 400mm joist centres. 

35mm Durafix® Fascia screw

35mm Durafix® Fascia screw

The 4.5 Gauge 35mm DuraFix® Fascia screw is a fixing that is to be used only with the Fascia boards.

The purpose of the 35mm Durafix Fascia screw is for situations where the Fascia is being fitted to thinner battens (batten depth can be 25mm or greater), where a longer screw wouldn’t work. The Durafix Fascia screw, like the other Durafix fixings, is made from A2 stainless steel and features the same ‘tulip-shaped’ Torx drive head. Once they’re in, the Millboard Lastane® coating on every board simply flexes back over the screw, leaving a virtually indistinguishable mark.

Reference codes

4.5 Gauge 35mm DuraFix® Stainless Steel (box of 100): MILFX35 

Touch-up Coating

Perfect for blending in cut ends, the Millboard touch-up coating is supplied in 500ml tins and in a range of eight colours to match your choice of Millboard decking.

Recommended reading