Fixed Slim 160mm Select Asymmetric Uplight
- 1.0M profile views
- 112 saves
The U970 is designed to be used as an uplight and features a special asymmetric lens to achieve an even wash of light on the wall and ceiling. The 180 degree aspect gives it a nice even wash from wall to ceiling. The 25 degree aspect gives it the punch to wash extra high pitched or flat ceilings.
Halcyon recommends installing no closer than 600mm to a flat or pitched ceiling for best results. Always aim to install with the bottom of the fitting above average eye height. The key with uplighting is correct positioning to find the balance between light intensity and light distribution. Too close to the ceiling and you will get a “hot spot” effect, too far and the fitting may be too low on the wall.
In some circumstances it is also suitable to be used as a downlight. However, keep in mind this is the exact opposite of what this luminaire has been designed for so if installed downwards at an incorrect height it will throw light outwards directly into the viewers eye.
Product Details
- Product
- Fixed Slim 160mm Select Asymmetric Uplight
- Category
- Uplights
- Sold by
- Halcyon Lighting
- Light bulb type
- LED
- Fitting type
- Surface-mounted
- Warranty
- 5 years
Halcyon Lighting is specified by
Ground Up StudioArchitects
Salmond ArchitectureArchitects
Young ArchitectsArchitects
Gibbons ArchitectsArchitects
RB StudioArchitects
YokeArchitects
Dorrington Atcheson ArchitectsArchitects
Architect PeopleArchitects
Condon Scott ArchitectsArchitects
Johnston ArchitectsArchitects
T Plus ArchitectsArchitects
Sheppard & Rout ArchitectsArchitects
South by Southeast ArchitectsArchitects
Borrmeister ArchitectsArchitects
RTA StudioArchitects
Origin HeritageArchitects
Dalman ArchitectsArchitects
Marina Mathews PhotographyPhotographers
DCDDesign & Build
Turton BuildersBuilders
JD Landscape ArchitectureLandscape Architects
Fleetwood ConstructionBuilders
Red ArchitectureArchitectural Designers
Wanaka StoneManufacturers and Suppliers
Topmark ElectricalElectricians
Inception ElectricalElectricians
Parsons ConstructionBuilders
House of NauticaBuilders
Downright ConstructionConstruction
Bagley ConstructionConstruction
Chris TateArchitectural Designers
Johnston Electrical ServicesElectricians
Turton Oliver Interior DesignInterior Designers
ao architectureArchitectural Designers
Weir ArchitectureArchitectural Designers
Matt Harrison ConstructionConstruction
Luijten LandscapingLandscape Architects
No Shock ElectricalElectricians
Bob Burnett ArchitectureArchitectural Designers
Pretty Sweet LightingElectricians
Liddington Electrical SouthernElectricians
Barry Connor DesignArchitectural Designers
O'Neil + Shirley ArchitectureArchitectural Designers
Lume DesignInterior Designers
DJ Hewitt BuildersBuilders
PHD BuildingBuilders
PlumblineManufacturers and Suppliers
Thomas ElectricalElectricians
DesignwellInterior Designers
Alabaster WorkshopManufacturers and Suppliers
ObjectsArchitectural Designers
Simon Devitt PhotographerPhotographers
Goldsack BuildersBuilders
The U970 is designed to be used as an uplight and features a special asymmetric lens to achieve an even wash of light on the wall and ceiling.
The 180 degree aspect gives it a nice even wash from wall to ceiling. The 25 degree aspect gives it the punch to wash extra high pitched or flat ceilings.
Halcyon recommends installing no closer than 600mm to a flat or pitched ceiling for best results. Always aim to install with the bottom of the fitting above average eye height. The key with uplighting is correct positioning to find the balance between light intensity and light distribution. Too close to the ceiling and you will get a “hot spot” effect, too far and the fitting may be too low on the wall.
In some circumstances it is also suitable to be used as a downlight. However, keep in mind this is the exact opposite of what this luminaire has been designed for so if installed downwards at an incorrect height it will throw light outwards directly into the viewers eye.
- Specs
U970
Watts 12W
Dimensions L160 x D120 x H45mm
Cut Out N/A - Surface Mount
Colour Temp Selectable 3000K Warm White or 4000K Natural White
Lumens 3000K Warm White 825lm, 4000K Natural White 940lm
CRI90+
Lifespan >54,000 hours (L90)
Beam Angle 180 x 25 degree beam
Material Aluminium
IP Rating IP65
Driver TRIAC dimmable driver incorporated
Electrical Class Class I luminaire, requires earth
Application Interior & Exterior Wall
Available in Black or White
Warranty 5 Year Warranty- Scope of use
Interior & Exterior Wall Light
- Performance
- CRI90
- IP65
- 54,000 hour (L90) lifespan
- Selectable 3000K or 4000K
- Dimmable
- Available in Black or White
- 5 Year Warranty
Downloads
Downloads (3)3 Direct downloads • 9 Available on request
Frequently asked questions about
Fixed Slim 160mm Select Asymmetric Uplight
The Fixed Slim 160mm Select Asymmetric Uplight is supplied by Halcyon Lighting. It is also on their website, and you can browse every product Halcyon Lighting lists on ArchiPro.
Halcyon Lighting does not publish a price for the Fixed Slim 160mm Select Asymmetric Uplight on ArchiPro. for pricing, or visit their website.
It is listed under Uplights on ArchiPro, where you can compare it with uplights from other suppliers.
Yes. It is part of the Fixed Slim Select Uplight Asymmetric range from Halcyon Lighting, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The Halcyon Lighting profile on ArchiPro has the rest of their products.
More products from
Halcyon Lighting
The rest of this range, and everything else Halcyon Lighting makes.
More in
Uplights
Everything else in Uplights, from every supplier on ArchiPro.
















