FLX

By Masons
Visit Website

Flexible Acrylic Plaster System for Crack Prevention

A highly flexible waterproof acrylic plaster membrane that is applied over substrates to provide a crack-resistant coating.

FLX™ is a highly flexible waterproof acrylic plaster membrane, that is applied over substrates to provide resistance against cracking. It’s a non-cement based waterborne acrylic plaster system containing aggregate to provide flexibility and has excellent adhesion qualities. FLX™ is Manufactured in NZ for New Zealand conditions, it’s a proven product that has been on the market for over 10 years.

Advantages

The highly flexible properties of FLX™ provide a flexible plaster finish on the exterior surface of the substrate, providing the homeowner, contractor or designer with the security of added protection to their investment.

Limitations

  • Do not apply when the ambient temperature is below 10°C or surface temperature is above 45°C.
  • Apply as supplied – do not thin.

Technical Data

Resin Type: Adhesion Promoted Pure Acrylic polymer Pigmentation: Titanium dioxide and inert extenders Solvents: Water Colour: White and pastel tints. Gloss Level: Low Sheen. Density: 1.34 Kgs/ Litre Dry-Time: 30 mins Touch, 4 hour between overcoat. Coverage: 4-6 m2 per litre. No. of coats: Two Packaging sizes: 4 & 15 litres Flash Point: None Thinner: Water

Surface Preparation

  • Remove all unsound paint, surface grease and oil, dirt etc. Treat mould affect areas with Masons Splash and Dash.

Application

  • Apply two coats of FLX™ Premium Range Acrylic Finish to dry film thickness of 80 microns per coat.
  • For metal or metal-reinforced concrete structures us a specified primer.
  • Apply one coat of LIMESTOP Plaster Sealer.

For Best Results

  1. Ensure correct dry film thickness is achieved.
  2. Allow at least 4 hours before overcoating.
  3. Do not apply in direct sunlight.

Health & Safety

  • FLX™ Premium Range Acrylic Finish is essentially non-flammable and non-hazardous. (Please refer to Material Safety Data Sheet before using)
  • KEEP OUT OF REACH OF CHILDREN
Details
  • Category
    Render Plaster Systems
For any enquiries regarding purchasing or using any of our products. Complete the contact form below, or contact us on 0800 522 533.
Visit Website

More from
Masons

PlastaTek™ Monotek Sheet System
PlastaTek™ Monotek Sheet System
By Masons
Masons PlastaSlab™ Tilt Panel System
Masons PlastaSlab™ Tilt Panel System
By Masons
Masons NZ Ltd - Brick & Block Masonry System
Masons NZ Ltd - Brick & Block Masonry System
By Masons
Masons PlastaBlock
Masons PlastaBlock
By Masons
Masons Plaster Sponge Finish 1mm
Masons Plaster Sponge Finish 1mm
By Masons
Masons Skim Plaster Coat Render
Masons Skim Plaster Coat Render
By Masons
Masons Meshing Fine Plaster Render
Masons Meshing Fine Plaster Render
By Masons
Masons Meshing Plaster Render
Masons Meshing Plaster Render
By Masons
Masons Jointing Glue Panel
Masons Jointing Glue Panel
By Masons
Masons Plaster Basecoat Render
Masons Plaster Basecoat Render
By Masons
View more

About the
Seller

Masons provide a range of quality trade building products from a complete Enclosure Building Wrap System and Exterior Cladding, to Brick Reinforcement, and are a crucial supplier in the New Zealand building industry.

Masons strive to be at the forefront of developing innovative products that raise the standards of New Zealand building products.

At ArchiPro we recognise and acknowledge the existing, original and ancient connection Aboriginal and Torres Strait Islander peoples have to the lands and waterways across the Australian continent. We pay our respects to the elders past and present. We commit to working together to build a prosperous and inclusive Australia.