HB1470 310mm Flush Pull for Sliding Doors
Victoria
- 674.9K profile views
- 58 saves
Designed to compliment the existing range of Halliday and Baillie Flush Pulls, the new larger HB1470 responds to the increasing size of interior doors. For hinge or pivot doors the companion HB1475 Bi-fold Flush Pull keeps a seamless look across a project.
(Shown with an HB680 End Pull - Flush Pulls sold separately)
Minimum Door Thickness Required: 33mm if used back to back with no end pull, 42mm if used back to back with an HB680 End Pull as pictured.
Material: Solid brass
Flush pulls : 310mm x 50mm x 15mm
Suitable for timber or aluminium doors
For finish options please see out current finishes sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face surface mounted - total projection is 2mm. Glue, epoxy, silicone products etc are not required or recommended for installation, and may void warrantee.
Product Details
- Product
- HB1470 310mm Flush Pull for Sliding Doors
- Category
- Cavity Slider Doors
- Sold by
- Halliday + Baillie
- Range
- Flush Pulls
- Designer
- Halliday + Baillie
- Brand
- Halliday + Baillie
Halliday + Baillie is specified by
TKD ArchitectsArchitects
MHNDUArchitects
Studio IlkArchitects
Abe McCarthy ArchitectsArchitects
Smyth & SmythArchitects
Anderson ArchitectureArchitects
Woods BagotArchitects
Utz Sanby ArchitectsArchitects
Cadence & CoArchitects
Bryant Alsop ArchitectsArchitects
DX ArchitectsArchitects
Shade FactorManufacturers and Suppliers
Designed to compliment the existing range of Halliday and Baillie Flush Pulls, the new larger HB1470 responds to the increasing size of interior doors.
For hinge or pivot doors the companion HB1475 Bi-fold Flush Pull keeps a seamless look across a project.
(Shown with an HB680 End Pull - Flush Pulls sold separately)
Minimum Door Thickness Required: 33mm if used back to back with no end pull, 42mm if used back to back with an HB680 End Pull as pictured.
Material: Solid brass
Flush pulls : 310mm x 50mm x 15mm
Suitable for timber or aluminium doors
For finish options please see out current finishes sheet. Please check with your local Halliday + Baillie representative as not all finishes are available in all regions.
Flush pulls are designed to be mounted with the body within the thickness of the door, and the face surface mounted - total projection is 2mm. Glue, epoxy, silicone products etc are not required or recommended for installation, and may void warrantee.
- Features
- Solid-brass construction for durability and high-quality finish.
- Long length (310 mm) caters to large door formats without disproportion.
- Minimal projection (~2 mm) for a flush, low-profile look.
- Suitable for timber or aluminium applications, supporting large door widths.
- Comes with optional timber-fixing kit for timber doors (HB 1410).
- Extensive finish palette to match other hardware or design finishes.
- Companion offset version (HB1475) available for consistency across door types.
- Solid-brass construction for durability and high-quality finish.
- Scope of use
The HB1470 310 mm Flush Pull is designed for large sliding, cavity-slider, pivot or hinged doors in high-end residential or commercial applications. It accommodates timber or aluminium door panels and is suited where a minimal door face finish is required — the body of the pull recesses into the door thickness, leaving only a slim face plate visible. It is ideal for situations demanding a clean architectural aesthetic on oversized interior doors, ensuring the hardware does not appear lost in scale. For projects where continuity across door types is required, the companion HB1475 offset flush pull allows matching appearance on bi-folds or pivot doors.
- Specs / Details
- Material: Solid brass.
- Overall dimensions: 310 mm (length) × 50 mm (width) × 15–17 mm (depth) depending on source.
- Internal grip depth: approx. 13–15 mm.
- Suited door types: Large timber or aluminium doors.
- Minimum door thickness: 33 mm (back-to-back without end pull); 42 mm if back-to-back with HB680 end pull.
- Projection from door face: approx 2 mm when flush mounted (body within door thickness).
- Fixing kit: Timber fixing kit (HB 1410) required for timber doors (sold separately).
- Finish options: Available in full Halliday + Baillie finish range (e.g., Satin Chrome, Polished Chrome, Brushed Nickel, Polished Brass, Electro Black Ace, etc).
- Material: Solid brass.
Downloads
Downloads (5)5 Direct downloads • 5 Available on request
Frequently asked questions about
HB1470 310mm Flush Pull for Sliding Doors
The HB1470 310mm Flush Pull for Sliding Doors is supplied by Halliday + Baillie. It is also on their website, and you can browse every product Halliday + Baillie lists on ArchiPro.
Halliday + Baillie does not publish a price for the HB1470 310mm Flush Pull for Sliding Doors on ArchiPro. for pricing, or visit their website.
It is listed under Cavity Slider Doors on ArchiPro, where you can compare it with cavity slider doors from other suppliers.
Yes. It is part of the Flush Pulls range from Halliday + Baillie, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The Halliday + Baillie profile on ArchiPro has the rest of their products.
More products from
Halliday + Baillie
The rest of this range, and everything else Halliday + Baillie makes.
More in
Cavity Slider Doors
Everything else in Cavity Slider Doors, from every supplier on ArchiPro.
