Infinit E™ | Low-E Glass

Infinit E™ is a special Low-E coating that is designed to increase the thermal performance of windows and reduce heat transfer.

Specs

Infinit E low-E coating increases the thermal performance of windows by reflecting the long wave heat radiation. This is best measured using the U-Value, which is a measure of the rate of heat gain or loss through glazing due to temperature differences of the internal and external environments. All glass must be engineered to specific code and design, please contact Woods Glass to find out more information.

CLEANING/MAINTENANCE

Normally when cleaning glass, a vinegar-based glass cleaner or mild dish soap and water with a soft, lint-free cloth or paper products is recommended. A squeegee or soft cloth may be carefully used to dry the glass and help avoid water spots.

It is not recommended to use petroleum-based cleaners or solvents as they can streak the glass and weaken the seal between the glass and frame. Avoid washing in direct sunlight to reduce streaking on the glass.

Never use razor blades, steel wool, putty knives or abrasive pads as they may damage the glass, particularly on toughened glass.

RANGE

Many different thicknesses and tints are available for Infinit E. It can also be applied to laminated glass, IGUs and combined with other products to increase solar control. Infinit E comes in both soft and hard coatings and specification is dependant upon the climate where it will be installed. Woods are able to supply many options so please contact us to discuss special requirements.