Outdoor Landscape Pool Drainage Channel - Tray & Grate

Not Applicable
Not Applicable

This wedge wire outdoor drain with electroplated matte black finish is perfect for pool drainage, architectural landscaping, and outdoor installation. The channel drain has a wide tray suitable to accommodate high-volume water flow and is perfect for any outdoor setting. Made from low-carbon 316L stainless steel for premium durability, the wedge wire grate is fully welded high load-bearing designed for high traffic areas. Custom-made in Australia to your specifications - any length and any outlet position(s).

Premium Specifications 

  • Composition: Full 316L (low carbon) marine grade stainless steel 
  • Finish: Matte black (electroplated) 
  • Tray: 1.2mm thick steel. 120mm wide. 51mm deep 
  • Grate insert: Fully welded. Heavy-duty 3mm x 20mm side walls and 3mm wedge wires with 3mm gaps 
  • Grate design: Wedgewire design, also known as "Heel Guard" design as it is suitable for high heels 
  • Joiner plate and end cap: Full 316L (low carbon) stainless steel 
  • Fixing bolts: Full 316L (low carbon) stainless steel 
  • Optional outlet(s): 50mm diameter to suit 50mm diameter (or greater) drainage plumbing 
  • Warranty: Lifetime warranty against manufacturing defects 
  • Manufactured in Australia 

This matte black linear outdoor channel drain is all 316L (low carbon) stainless steel and has no plastic parts. Simply enter your required length in mm and the required position of the outlet(s) and it will be made to order and supplied in parts as per the installation information.  

  • Full marine-grade 316L (low carbon) stainless steel for premium corrosion resistance (suits coastal regions and salt pools) 
  • Sleek electroplated matte black stainless steel wedge wire grates provide a bold and modern architectural look 
  • Heavy duty to support heavy traffic 
  • Perfect architectural installation for premium landscape drainage or pool drainage

Heavy Duty Wedge Wide Grate Top 

  • Fully welded high load-bearing wedge wire insert - with 3mm wedge wires and 3mm gaps for a uniform look 
  • 5mm x 20mm side walls for superior strength 
  • Separate lengths are butted against each other for a seamless look. 
  • If multiple wedge wire inserts are required they will be custom cut to equal lengths.

Drainage tray 

  • 1.2mm thick stainless steel for heavy-duty durability 
  • 51mm deep stepped tray for efficient water drainage 
  • Simple modular components and assembly allows for DIY installation 
  • Stainless steel joiner plates and end caps easy to assemble with supplied 316SS fixings or a suitable silicone adhesive 


drainTEK - Architectural Drainage Channels 

drainTEK's locally manufactured Shower Grates and Outdoor Drainage Channels are 100% stainless steel - heavy-duty marine-grade 316 polished stainless steel and high-quality 304 grade for the matte black finish. Full customisation available and Australia's fastest despatch and lowest pricing make drainTEK a preferred choice with discerning architects.

Details
  • Category
    Surface Drainage
  • Range
    DrainTEK
Specifications
  • Premium Specifications Composition: Full 316L (low carbon) marine grade stainless steel 
  • Finish: Matte black (electroplated) 
  • Tray: 1.2mm thick steel. 120mm wide. 51mm deep 
  • Grate insert: Fully welded. Heavy-duty 3mm x 20mm side walls and 3mm wedge wires with 3mm gaps 
  • Grate design: Wedgewire design, also known as "Heel Guard" design as it is suitable for high heels 
  • Joiner plate and end cap: Full 316L (low carbon) stainless steel 
  • Fixing bolts: Full 316L (low carbon) stainless steel 
  • Optional outlet(s): 50mm diameter to suit 50mm diameter (or greater) drainage plumbing 
  • Warranty: Lifetime warranty against manufacturing defects 
  • Manufactured in Australia 
Scope of use
Drainage channel tray lengths

The drainage channel will be supplied in modules to fulfill your required length with joiner plates and end caps. The following are the channel module sizes:

  • 3.0 metre (3000mm) length
  • 2.0 metre (2000mm) length
  • 1.0 metre (1000mm) length
  • 0.5 metre (500mm) length
  • Custom length (to complete your overall ordered length)

So, for example, if you order a total linear length of 5.4 metres we will supply:

  • 1 x 3.0 metre (3000mm) trays
  • 1 x custom pre-cut 2.4 metre (2400mm) tray
  • 1 x tray joiner plates and fixings
  • 2 x tray end caps and fixings

*PLEASE NOTE: the top folded lip on the supplied end-caps is 4mm wide. So if you are ordering a 1000mm tray, once you add two end-caps the overall exterior length will be 1008mm (1000mm tray + 2 x 4mm endcaps). Therefore please allow for any endcaps in your overall ordered length.

Simple Modular Assembly
  • Simple bolt assembly - The standard channel module lengths have pre-installed bolt holes to affix the supplied end caps or joiner plates (for long lengths).
  • Bolts supplied - 316 Stainless Steel bolts are supplied for the installer to assemble the channel modules prior to installation
  • Utilise sealant - drainTEK recommends that a quality outdoor waterproof adhesive silicone is also used with the bolts at channel joins and end-caps to ensure a suitable seal
  • Affix and seal end-caps - Custom cut lengths of outdoor channels may not have the pre-installed bolt holes at one or both ends. In this case, simply use a quality outdoor waterproof adhesive silicone to affix and seal the end-cap.
  • Affix and seal outlets - Outlets are also to be affixed to the underside of the channel where holes have been drilled to order. Simply use a quality outdoor waterproof adhesive silicone to affix and seal the outlet.

Drainage Grate Insert - Wedge Wire (Heel Guard)

The drainage grate is supplied in lengths of up to 3.0m (3000mm). If a total length greater than 3.0m is ordered we will supply multiple grates in equal lengths. So, for example, if you order a total linear length of 5.4 metres we will supply 2 x 2.7 metre (2700mm) lengths. These butt against each other for a seamless look.


Optional Corner Piece

If you require a corner piece it can be included in your order in the product options. See the image bank for an example of an order with a corner piece

SKU: CSG-OUT-WEDWIR-1112-B
Get in touch
Visit Website

About the
Seller

  • Products listed
  • Recent Responsiveness

    92%

    Usually responds within
    3 days on weekdays

Vanguard Design Group develops and manages specialist residential fixture and fittings brands. Each brand targets design excellence and innovative functionality to suit the Australian and New Zealand markets.

Discerning homeowners seek to fit out their homes with luxury fixtures that not only provide that design appeal but are made to last.  Vanguard Design manufactures products using superior materials and components so that they perform their function for the long term.

The "Design" in Vanguard Design is the focus of the business.  Design excellence combines both the aesthetic appeal required for luxury homes with the functional requirement of the product.  Vanguard aims to make all its products both beautiful and highly functional.

The building industry requires reliable product supply.  Vanguard holds its stock centrally in Victoria for fast delivery Australia-wide.  Some items such as custom drains can even be manufactured to order onthe same day.  The service team is there to answer all client queries pre and post sale.

At ArchiPro we recognise and acknowledge the existing, original and ancient connection Aboriginal and Torres Strait Islander peoples have to the lands and waterways across the Australian continent. We pay our respects to the elders past and present. We commit to working together to build a prosperous and inclusive Australia.