Resene Concrete Wax
Protect concrete benchtops and floors with Resene Concrete Wax.
Concrete benchtops and floors look superb when first installed. But often after some wear and tear, dust and dirt starts getting entrained into the surface and it can be near impossible getting the surface truly clean again.
Protect concrete benchtops or floors with Resene Concrete Wax, a tough waterborne satin glaze that is quick and easy to apply. Scratches are easily repairable making it easy to keep the surface maintained.
Resene Concrete Wax is non-yellowing, resistant to chipping, peeling and oil and fat splashes. Apply it on your concrete floor and benchtop and let Resene Concrete Wax bear the brunt of the wear and tear rather than your concrete.
Available from Resene ColorShops and selected resellers.
- CategoryInterior Paints
Typical uses:
- Concrete benchtops
- Concrete floors
Physical properties:
- Vehicle type: Acrylic-urethane
- Pigmentation: None
- Solvent: Water
- Finish: Satin
- Colour: Milky – dries clear
- Dry time (minimum): 30 minutes at 18°C
- Recoat time (minimum): 2 hours
- Primer required: No
- Theoretical coverage: 16 sq. metres per litre (18 µm DFT)
- Usual no. of coats: 3-4 (varies with surface porosity)
- Abrasion resistance: Very good
- Chemical resistance: Good
- Heat resistance: Good
- Solvent resistance: Good
- Durability: Excellent
- Thinning and clean up: Water
- VOC: 52 grams per litre, (see Resene VOC Summary)
More from
Resene
About the
Seller
- ArchiPro Member since2015
- More information