Dusky white/ivory/pink/apricot handmade sandstock brick reminiscent of natural sandstone.
Linear bricks were once a very widely used building material. However they fell out of favour when mass production and the standardisation of bricks became prominent. However, the use of linear bricks are once again becoming increasingly popular as consumers are looking for some product diversity and linear bricks offer a dramatically different look over standard size bricks. With a face size of 330mm x 50mm, they are very different from the traditional brick size of 230mm x 75mm.
Living Bricks
Similar to timbers, light coloured bricks (ivory bricks, grey bricks) arelivin bricks in that their colour will change over time due to interaction with the local environment. Being a light colour, light coloured clay bricks will show stains generated from wetting, local pollution, pollens and numerous other environmental factors. Please also be aware that light coloured bricks (ivory bricks, grey bricks) which are based on natural ivory coloured clays can show pinks through to pale reds due to iron within the clay.
Vanadium Staining
Light-coloured clays as used in ivory and grey bricks often contain vanadium salt that are generally colourless, but under certain conditions may appear as a yellow, green or reddish-brown discolouration of the brick. It is essential that any vanadium salts evident prior to the removal of mortar residue be removed, as the hydrochloric acid may turn the salt black and become difficult to remove. Vanadium stains are often generated by the use of too strong a concentration of hydrochloric acid during the initial cleaning process, or from excessive water penetration (during construction (i.e. before flashings/copings/sills have been installed), brickwork should be protected from storm water through the use of tarps and other coverings). Vanadium stains are neither permanent nor harmful and do not indicate a defect in the brick. Vanadium stains in exposed areas generally wash off in time but their removal can be hastened by chemical treatment. After the initial removal of vanadium stains, more water on the masonry – even that used in the cleaning process – may induce further efflorescing of the salts to the surface, depending on the amount within the brick. It is important to understand and accept that vanadium staining is a natural process of clay products and is most obvious in light coloured bricks, if you are concerned about this process we would advise against the use of light coloured bricks.