Soap Rack - 8200 Series Number 8230

Product Dimensions: 188mm(w) x 128mm(d) x 48mm(h)

Material: GRADE 304 Stainless Steel

Warranty: 15 Year Limited Guarantee

Fixing / Mounting System: RIGID Loc with double screw wall fixing

Suitable to be installed: Masonry or Concrete surface (wall fixings supplied), Tiled surface (wall fixings supplied), Dry wall - mounting onto stud (wall fixings not supplied), Glass (using Bathroom Butler glass mountings - optional extra)

• Raised front and back bar to prevent soap from slipping off.
• Base allows for water drainage and air flow to dry your soap, eliminating water build up and soggy soap.
• Grade 304 Stainless Steel construction ensures durability, with no rusting or peeling.
• Easy to install with our follow along instructions & template.
• Can be mounted on a variety of surfaces, including glass and drywall.

RIGID Loc Mounting System

The innovative, one-of-a-kind RIGID Loc Mounting System was engineered to ensure our bathroom accessories remain locked in place and to prevent constant retightening and maintenance of loose or wobbly paper holders, towel rings and other accessories.

High Grade Material

GRADE 304 Stainless Steel is the finest material choice for our bathroom accessories because its natural corrosion resistance properties prevent rusting, staining, peeling, flaking or chipping. Grade 304 Stainless Steel is also a hygienic material – it is non porous, and it does not collect bacteria or algae.

Cleaning and Care:

To keep your product in pristine condition, simply wipe it down with a warm damp cloth and then buff dry with a microfiber cloth. You could also, on occasion use a Chlorine-free stainless steel cleaner to maintain the shine. If you use stainless steel polish, make sure it is abrasive free. When cleaning wall surfaces around your bathroom accessories do not use any household detergents that may contain Chlorine based chemicals such as bleach as it will cause permanent damage to the surface of the stainless steel product.

• Clean regularly with a warm damp cloth, and then buff dry with a clean dry cloth
• DO NOT use the rough end of a kitchen sponge to clean your bathroom accessory
• To remove any small blemishes or fine scratches, use a non-abrasive metal polish
• DO NOT clean your bathroom accessory with any kind of ACID BASED CHEMICAL, TILE CLEANER or detergents that contain Chlorine, as these may contaminate and damage the surface finish 

What’s in the box:

• 8230 Soap Rack
• Fischer UX 6mm Plastic Plugs (4 pieces)
• Wall Screws (4 pieces)
• 2.5mm Allen Key (1 piece)
• Installation Instructions (1 piece)
• Mounting Template

Tools needed (not supplied):

Drill & Drill bits

• 6mm Diamond drill bit – if drilling through ceramic tiles
• 6mm Masonry drill bit – if drilling into Masonry (Brick)

Measuring tape

PH2 Screwdriver

Pencil

Spirit level

Installation tip:

• Check for water pipes before deciding where to drill
• In Masonry walls, always drill a smaller pilot hole first for better sizing and location accuracy

Manufacturers Warranty:

All components of Bathroom Butler® stainless steel bathroom accessories with RIGID Loc Mounting system, excluding the colour finishes, are guaranteed against any manufacturing defects for a period of 15 years from date of purchase, as printed on the sales docket, which must be provided as proof of purchase. This updated Guarantee only applies to bathroom accessories with RIGID Loc purchased after 1 January 2020, all bathroom accessories with RIGID Loc purchased prior to 1 January 2020 carry a 10-year Limited Guarantee. All other bathroom accessories without RIGID Loc mounting system carry a 5-year Limited Guarantee.

Colour Finishes: The surface finish of all colour components (including PVD and other coating methods) of Bathroom Butler® bathroom accessories are guaranteed against any manufacturing defects for a period of one year from the date of purchase.

Excluded from this warranty are damages resulting from force majeure (Acts of God), including, but not limited to, lightning and floods, fair wear and tear, misuse, wilful damage, negligence, repair of device without the approval of Bathroom Butler® or damage resulting from incorrect installation.

The manufacturer’s liability is limited to repair or replacement of bathroom accessories only. No claim for consequential damage and/or labour and/or transport will be entertained. Damages arising from misuse of the bathroom accessory will render the warranty invalid.

This warranty is only valid when the product has been purchased from an authorised reseller or country/territory distributor and is only valid within the geographical borders of the country/territory that it was originally purchased. This warranty only extends to the original purchaser of this product and is not transferable.

Fixing System: RIGID Loc Mounting System

This product uses our patented RIGID Loc mounting system which is designed to ensure the bathroom accessory remains secure to its mounting and will not rotate.

Material: GRADE 304 Stainless Steel

Stainless Steel has a natural resistance to corrosion and therefore does not require any protective coating which makes this material ideal for the bathroom environment. The shiny polished finish of Stainless Steel is often confused with a Chrome finish, however the two could not be more different. While Stainless Steel will not peel or flake, Chrome products on the other hand are susceptible to chipping and pitting due to the nature if a coated product.