The Hanmer Table Top Cylinder Corten Water Feature
by Tiny Anvil
Auckland, New Zealand
- 955.7K profile views
- 140 saves
A calm, sculptural water feature designed to sit naturally in the garden.
The Hanmer Water Feature in its new cylinder form brings quiet movement and warmth to outdoor spaces. Crafted from raw corten steel, it develops a rich, natural patina over time, grounding it beautifully among planting, stone, and timber.
Water gently wells up from the centre and flows across the surface, creating a subtle ripple effect that’s soothing rather than showy. It’s designed to be enjoyed up close — as a focal point in a garden, courtyard, or outdoor living area.
At 800mm in diameter and 500mm high, the Hanmer has real presence without overpowering the space. The solid construction gives it weight and stability, while the simple cylindrical form keeps the design timeless.
Simple, self-contained setup
The Hanmer is supplied complete with a water pump. Installation is straightforward: place the pump in the reservoir, feed the cord through the standpipe, fill with water, plug in, and switch on. No plumbing required.
All Tiny Anvil corten water features are treated with a linseed oil coating to help keep the water clear as the steel settles. During the initial run-in period, water may not flow evenly across the surface — this is normal. Allow it to run for 24–48 hours and it will even out naturally. We recommend reapplying linseed oil when cleaning the pump, approximately every 9–12 months.
Product Details
- Product
- The Hanmer Table Top Cylinder Corten Water Feature
- Category
- Water Features
- Sold by
- Tiny Anvil
- Range
- Water Features
- Designer
- Paula Schultz
- Brand
- Tiny Anvil
- Year
- 2025
- Warranty
- 10 years
Product Variants
- Material
Tiny Anvil is specified by
JuralcoManufacturers and Suppliers
AD ArchitectureArchitectural Designers
RCPProject Managers
Luijten LandscapingLandscape Architects
Humphreys LandscapingLandscape Architects
Natural Habitats LandscapesLandscape Architects
Anna Pepper DesignLandscape Designers
Twining Valley NurseriesManufacturers and Suppliers
Modal ArchitectureArchitectural Designers
A calm, sculptural water feature designed to sit naturally in the garden.
The Hanmer Water Feature in its new cylinder form brings quiet movement and warmth to outdoor spaces. Crafted from raw corten steel, it develops a rich, natural patina over time, grounding it beautifully among planting, stone, and timber.
Water gently wells up from the centre and flows across the surface, creating a subtle ripple effect that’s soothing rather than showy. It’s designed to be enjoyed up close — as a focal point in a garden, courtyard, or outdoor living area.
At 800mm in diameter and 500mm high, the Hanmer has real presence without overpowering the space. The solid construction gives it weight and stability, while the simple cylindrical form keeps the design timeless.
Simple, self-contained setup
The Hanmer is supplied complete with a water pump. Installation is straightforward: place the pump in the reservoir, feed the cord through the standpipe, fill with water, plug in, and switch on. No plumbing required.
All Tiny Anvil corten water features are treated with a linseed oil coating to help keep the water clear as the steel settles. During the initial run-in period, water may not flow evenly across the surface — this is normal. Allow it to run for 24–48 hours and it will even out naturally. We recommend reapplying linseed oil when cleaning the pump, approximately every 9–12 months.
- Pricing
- From $1,620 *Price indication
- Specs
Dimensions & Weight
- Diameter: 800mm
- Height: 500mm
- Weight: 74kg
Material
- Corten steel
- Supplied with linseed oil coating to stabilise the surface during use
Assembly
- Supplied fully fabricated
- No assembly required beyond pump placement and filling with water
Installation
- Designed for ground-level installation on a stable, level surface
- Suitable for placement on gravel, paving, concrete, or compacted ground
- Requires access to a standard outdoor power supply
- No fixed plumbing required
Technical
- Self-contained recirculating water system
- Submersible electric pump included
- Internal reservoir concealed within the unit
Compatible Products
- Compatible with standard outdoor-rated power outlets
- Designed to integrate with landscape materials such as gravel, stone, and paving
Care and Maintenance
- Water levels should be checked periodically and topped up as required
- Pump should be cleaned approximately every 9–12 months
- Reapply linseed oil coating during pump maintenance to maintain water clarity
Cleaning
- Clean pump and internal reservoir as required
- Surface may be wiped down or left to weather naturally
- Avoid abrasive cleaners on the steel surface
Packaging — Unit Size
- Supplied as a single, fully assembled unit
- Due to weight, mechanical assistance or multiple people are recommended for placement
Warranties
- Pump covered by manufacturer’s warranty
- Steel structure covered against manufacturing defects
- Natural weathering, patina variation, and colour changes are not considered defects
Testing
- Designed and produced for long-term outdoor use
- Material performance based on corten steel’s proven weathering properties
- Features
- Self-contained, recirculating water feature with submersible pump
- Smooth, even water flow from central outlet with minimal splash or noise
- Solid corten steel construction provides stability and long-term durability
- Structural-grade corten develops a protective patina over time, suited to NZ conditions
- Linseed oil coating helps stabilise the surface and reduce initial rust runoff
- Cylindrical form improves balance, water spread, and visual calm compared to earlier versions
- Designed for low maintenance, with periodic water top-ups and pump cleaning
- Pump included and covered by manufacturer’s warranty
- Steel structure covered against manufacturing defects
Natural patina development, colour variation, and surface changes are expected and form part of the material’s character.
- Self-contained, recirculating water feature with submersible pump
- Scope of use
The Hanmer Water Feature is designed as a self-contained, decorative outdoor water feature for residential and light commercial settings.
It is suitable for placement in gardens, courtyards, patios, and outdoor living areas where a calm visual and acoustic water element is desired. The feature sits at ground level and is intended to be enjoyed as a sculptural focal point within planting, gravel, paving, or landscape design.
The unit operates using a submersible electric pump housed within the internal reservoir. No fixed plumbing is required. Installation involves filling the reservoir with water, connecting the pump via a standard outdoor power supply, and switching on. Ongoing operation requires periodic topping up of water levels, particularly in warmer or windy conditions.
The Hanmer Water Feature is manufactured from corten steel, which develops a natural patina over time. A linseed oil coating is applied to help stabilise the surface and keep water clear during use. As the feature beds in, water flow may initially be uneven and will naturally balance after continuous operation.
Suitable applications
- Residential gardens and courtyards
- Outdoor living and entertaining areas
- Landscape design projects
- Entry features and visual focal points
- Light commercial spaces such as hospitality courtyards or office gardens
Limitations and exclusions
- Not designed for indoor use
- Not suitable for use as a pond or for aquatic life
- Requires access to an outdoor power supply
- Not intended for high-traffic public areas without supervision or protective planning
- Surface runoff during initial weathering should be considered when placing near light paving or surfaces
The Hanmer Water Feature is best used in environments where natural material ageing is embraced and where routine, low-maintenance care is acceptable as part of long-term outdoor use.
Downloads
Downloads (2)2 Direct downloads • 10 Available on request
Frequently asked questions about
The Hanmer Table Top Cylinder Corten Water Feature
The The Hanmer Table Top Cylinder Corten Water Feature is supplied by Tiny Anvil. It is also on their website, and you can browse every product Tiny Anvil lists on ArchiPro.
Tiny Anvil lists the The Hanmer Table Top Cylinder Corten Water Feature from $1,620, as a price indication. For an exact price for your project, .
It is listed under Water Features on ArchiPro, where you can compare it with water features from other suppliers.
Yes. It is part of the Water Features range from Tiny Anvil, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The Tiny Anvil profile on ArchiPro has the rest of their products.
More products from
Tiny Anvil
The rest of this range, and everything else Tiny Anvil makes.
More in
Water Features
Everything else in Water Features, from every supplier on ArchiPro.
Supplier Reviews