Rangehoods

Start by matching the rangehood to your cooking layout, not just the finish. The right unit needs the correct width, extraction type and installation format. A 60cm stainless steel rangehood is often used above compact cooktops in apartments or smaller kitchens. A 90cm stainless steel rangehood or 900mm stainless steel canopy rangehood is a better match for wider cooktops, freestanding cookers and households that cook often.

A stainless steel canopy rangehood is installed on the wall or over an island and is usually visible. It suits kitchens where the appliance can form part of the design. Search terms such as 90cm canopy rangehood stainless steel and 900mm stainless steel canopy rangehood usually point to this style. Check the depth as well as the width, as a wider canopy still needs to sit correctly over the cooking zones.

A 60cm fixed rangehood stainless steel model is a straightforward option for rental properties, smaller homes and simple cabinetry. A slide out rangehood is more discreet because the front fascia pulls forward during use. Undermount models sit inside overhead cabinetry for a more integrated look. Some buyers look for specific configurations such as a 90cm fixed rangehood stainless steel model or a 90cm undermount unit with an on-board motor.

Ducted rangehoods extract air to the outside through ducting and a wall, ceiling or roof outlet. They are preferred where the building layout allows it. Recirculating models filter air and return it to the room, which can help in apartments or renovations where ducting is difficult. If you are ducting through the roof, confirm the correct steel roof rangehood flue kit, duct diameter and outlet position before ordering.

• Width: Match the rangehood to the cooktop. Common options include 60cm, 90cm and 900mm widths.
• Material and finish: Stainless steel is the standard choice, while dark stainless steel rangehoods can suit black appliances and deeper joinery tones.
• Motor location: On-board motors are built into the rangehood. Off-board or external motors can reduce noise near the cooking area.
• Extraction rate: Larger rooms, open-plan kitchens and high-output cooktops usually need stronger extraction.
• Noise level: Compare decibel ratings at typical fan speeds, not only the maximum setting.
• Filters: Stainless steel or aluminium grease filters should be easy to remove and clean.
• Lighting: Integrated lights should illuminate the cooktop without glare.
• Clearance: Follow the rangehood and cooktop manufacturers' installation clearances, especially above gas cooktops.

Rangehoods work best when they are planned with the wider kitchen appliance package. Browse the full kitchen appliances category if you are comparing finishes, widths and specifications across the whole room. Stainless steel pairs naturally with cooktops, ovens and dishwashers, but it can also sit comfortably beside integrated fridges and freezers or a compact bar fridge.

For entertaining spaces, match the rangehood finish with wine cabinets or wine fridges. In larger homes, it can also be worth planning nearby warming drawers, water filter systems, waste disposal units and small kitchen appliances at the same time. This helps avoid clashing finishes, tight clearances and crowded power points.

Before selecting a steel rangehood, confirm the installation path, electrical requirements and cabinetry dimensions with your builder, designer or supplier. For renovations, measure the existing cut-out and duct route before comparing models. For new builds, decide early whether you want a visible canopy, a hidden undermount rangehood or a slimline stainless steel model built into overhead joinery.

ArchiPro brings together premium stainless steel rangehoods from trusted suppliers, so you can compare style, size and performance in one place. Shortlist products that fit your cooktop width, confirm installation details, then speak with suppliers about availability, specifications and the best option for your kitchen.