65TR40 for 65G100 and 65G90
by Stormtech
New South Wales
- 560.3K profile views
- 67 saves
The 65TR40 is our standard grate designed to be used with our Special Assembly units 65G100 and 65G90.
65mm wide UPVC channel is connected via downpipes at 200mm intervals to sockets in a 100mm drain below. This allows the channel to be installed level while the drainpipe is given sufficient fall to be self-cleaning.
Please note that our TR grates have a non linished finish.
Please be aware that depending on the installation environment, for a pool installation or close to a surf beach, you may need to have your stainless steel grates electropolished.
This unique drainage system was recognised for its innovation by a DesignMark at the Australian International Design Awards.
Product Details
- Product
- 65TR40 for 65G100 and 65G90
- Category
- Surface Drainage
- Sold by
- Stormtech
- Range
- Special Assembly
Product Variants
- Size
Stormtech is specified by
NTF ArchitectureArchitects
Cadence & CoArchitects
Smyth & SmythArchitects
Rama ArchitectsArchitects
Bryant Alsop ArchitectsArchitects
J Mammone ArchitectureArchitects
djrd architectsArchitects
BVNArchitects
Ian Moore ArchitectsArchitects
WexhausArchitects
Winter ArchitectureArchitects
Chan ArchitectureArchitects
Windiate ArchitectsArchitects
Whisker ArchitectureArchitects
DX ArchitectsArchitects
Eliza Blair ArchitectureArchitects
Bower ArchitectureArchitects
Hive ArchitectureArchitects
SJBArchitects
ArchierArchitects
Tim Hodges ArchitectArchitects
Greenaway ArchitectsArchitects
Create ArchitectureArchitects
Utz Sanby ArchitectsArchitects
Tham ArchitectsArchitects
Taylor KnightsArchitects
Hutchinson BuildersBuilders
Millboard DeckingManufacturers and Suppliers
K.Holland Architectural InteriorsInterior Designers
Studio ApercuInterior Designers
BeecraftBuilding Designers
Matic by DesignInterior Designers
Seidler GroupDesign & Build
STUDIO GAXAInterior Designers
Sici DesignInterior Designers
The 65TR40 is our standard grate designed to be used with our Special Assembly units 65G100 and 65G90.
65mm wide UPVC channel is connected via downpipes at 200mm intervals to sockets in a 100mm drain below. This allows the channel to be installed level while the drainpipe is given sufficient fall to be self-cleaning.
Please note that our TR grates have a non linished finish.
Please be aware that depending on the installation environment, for a pool installation or close to a surf beach, you may need to have your stainless steel grates electropolished.
This unique drainage system was recognised for its innovation by a DesignMark at the Australian International Design Awards.
- Specs
Channel Width: 65mm
Channel Depth: 40mm
Length(s): 900mm, 1000mm, 1200mm, 1500mm
Outlet Size: N/A
Downloads
Downloads (3)3 Direct downloads • 6 Available on request
Frequently asked questions about
65TR40 for 65G100 and 65G90
The 65TR40 for 65G100 and 65G90 is supplied by Stormtech. It is also on their website, and you can browse every product Stormtech lists on ArchiPro.
Stormtech does not publish a price for the 65TR40 for 65G100 and 65G90 on ArchiPro. for pricing, or visit their website.
It is listed under Surface Drainage on ArchiPro, where you can compare it with surface drainage from other suppliers.
Yes. It is part of the Special Assembly range from Stormtech, where you can see every product in the range together.
from this page, see their contact details on ArchiPro, or visit their website. The Stormtech profile on ArchiPro has the rest of their products.
More products from
Stormtech
The rest of this range, and everything else Stormtech makes.
More in
Surface Drainage
Everything else in Surface Drainage, from every supplier on ArchiPro.
