CUTEK® Extreme CD50, formerly known as CD50 Extreme, is a high-performance, oil-based wood stabiliser with a unique self healing effect. Penetrating deeply into timber, CUTEK® Extreme CD50 highlights the natural grain and beauty of wood whilst providing robust and long-lasting protection. CUTEK® Extreme CD50 will not flake or peel and maintenance is fast and simple – no need to sand or strip.

CUTEK® Extreme CD50 is made in New Zealand for New Zealand conditions. CUTEK® Extreme CD50 diffuses throughout wood to control liquid and gas phase moisture, to minimise warping, cupping and splitting. By improving the dimensional stability of wood, CUTEK® Extreme CD50 improves the service life of your timber.

CUTEK® Extreme CD50 enhances the natural beauty, grain and texture of timber. Applied as a clear oil, CUTEK® Extreme CD50 will allow timber to naturally silver over time. Mixing in one of 16 CUTEK® Colourtones will help to enhance and maintain the freshly oiled natural look of your timber or alter your timber colour to meet your design requirements. 

Details
  • Category
    Timber & Wood Stains, Timber Stains, Timber Coatings
  • Brand
    CUTEK®
Scope of use

All exterior wood applications except for those listed below:

  • Acetylated wood
  • Food preparation surfaces
  • Wood which comes into direct contact with the ground
  • Engineered bamboo products

CUTEK® Extreme CD50 contains a small amount of copper salts that may impart a faint green hue on some very light or white coloured timbers. This is more likely to occur in internal applications or in areas not exposed to UV light. Some commonly used light coloured timber species used internally where this may be an issue are Radiata Pine, Kauri, and Victorian Ash (list not exhaustive). We have a copper-free product called CUTEK® Euro (available by special order) which is extensively used as an alternative to CUTEK® Extreme CD50 in these instances . For more information regarding this option, please contact our friendly technical support team who will be able to assist you with your project.

CUTEK® Extreme CD50 may be suitable for use on other engineered and composite wood products. Please contact our technical support staff for further information regarding the suitability of CUTEK® Extreme CD50 for your specific substrate.

Features
  • Maintenance is fast and simple:
    No need to sand or strip, just simply clean and recoat
  • Stabilises your wood – long-term accumulative protection:
    Significantly reducing splitting, warping and cupping
  • No flaking or peeling:
    Instead, the coating is designed to fade with time
  • Simple and easy to use:
    No technical experience necessary
  • Cost effective – up to 2x coverage rate of most wood coatings:
    Up to 2x the coverage rate of most wood coatings
  • Made in Aotearoa, New Zealand:
    Developed in New Zealand over 30 years ago for our unique environment
  • Sustainable choice:
    Significantly extends the service life of timber
  • Long-term accumulative portection:
    Stays active inside your timber to protect from the inside out
  • You timber is the star:
    Enhances the natural colour and grain of your timber
  • CUTEK® Cares:
    We plant 1 tree for every can of CUTEK® Extreme CD50 sold.
Preparation

In order for CUTEK® Extreme CD50 to function properly, it is essential that it diffuses deeply into the timber. Anything that might prevent this penetration/diffusion, such as an existing coating (not CUTEK® oil), retained moisture, or insufficient time between coats, must be avoided or corrected before applying CUTEK® Extreme CD50.

CUTEK® Extreme CD50 must be applied to wood that is clean, non-greasy and dry (moisture content must be less than 17%). You must appropriately prepare your timber BEFORE applying CUTEK® Extreme CD50.

If you have… new timber:
Your timber must be bare, clean and dry before applying CUTEK® Extreme CD50. If your timber presents with surface contaminants such as stains caused by water, iron or tannins, we recommend using CUTEK® Restore prior to application of CUTEK® Extreme CD50.

If you have… old, greyed or weathered uncoated wood:
Old, dirty, stained or grey weathered timber should be prepared and restored by first applying CUTEK® Restore which will remove the grey and reinstate the original natural colour, grain and beauty of your wood prior to application of CUTEK® Extreme CD50.

If you have… wood previously coated with a non-CUTEK® coating:
CUTEK® Extreme CD50 must be applied to bare, clean and dry wood. This allows the CUTEK® oil to freely penetrate/diffuse into your timber. New pre-coated wood (pre-coated with products other than CUTEK® oils) or wood previously coated with a film forming product such as stains, linseed oil, cross-linking vegetable oils, paint, polyurethane, water-based oils, etc. can inhibit this penetration/diffusion and must be removed first with CUTEK® Wood Stripper and CUTEK® Restore prior to the application of CUTEK® Extreme CD50. In some circumstances complete removal of previous coatings by machine sanding/abrasion can also be a suitable preparation method.

If you have… wood previously coated in CUTEK® Extreme CD50:
Prepare for a maintenance recoat of CUTEK® Extreme CD50 by using CUTEK® Quickclean to remove grease, grime and other dirt from your timber. If maintenance has been neglected for a long period of time and the timber has either greyed, become heavily stained by tannins or iron, or if there is an excessive build-up of CUTEK® Colourtone, use CUTEK® Restore to refresh your timber prior to recoating.

Important information before proceeding: Pre-coated timber
A significant amount of new timber is now sold with a pre-treatment or pre-coating already applied. Particular attention needs to be paid to find out whether your timber has been pre-treated or pre-coated with a non-CUTEK® oil product PRIOR to applying CUTEK® Extreme CD50. An easy way to tell if your timber has been pre-coated with another product is to flick a few drops of water onto your timber. If the water sinks in, that means there is no barrier to stop CUTEK® Extreme CD50 from penetration and you will be able to start coating with CUTEK® Extreme CD50 right away. However, if the water beads on the surface of your wood this is a good indication that your timber has had a prior treatment/coating applied and you will need to adequately prepare your wood as per the instructions for “If you have… WOOD PREVIOUSLY COATED WITH A NON-CUTEK® COATING” above before you start coating with CUTEK® Extreme CD50. If you have any questions about this process, please contact one of our friendly technical advisers on 0800 1 CUTEK (0800 1 28835).

NOTE: This warning does not apply to any timber that has been pre-coated in CUTEK® branded products.

Some manufacturers of pre-coating products falsely claim that any other product, including CUTEK® oils, may be applied over the top of their existing coating. These statements are inaccurate and misleading in relation to CUTEK® oil products. If you are unsure about the correct preparation method for your CUTEK® project, please contact one of our friendly staff who are more than willing to advise you correctly.

When using timber pre-coated in something other than CUTEK® oils, another important factor to note is that some coating types (particularly those based on cross-linking vegetable oils such as linseed, tung oils etc.) may actively promote mould and biological growth which can lead to unsightly discolouration appearing on your timber as it ages over time. It is very important that you remove all traces of these types of coating PRIOR to coating with CUTEK® Extreme CD50 to avoid these biological stains (mould and fungi) appearing. Unlike vegetable oil-based products, CUTEK® oils do not act as an active promoter of biological growth.

Using light coloured timber
CUTEK® Extreme CD50 contains a small amount of copper salts that may impart a faint green hue on some very light or white coloured timbers. This is more likely to occur in internal applications or in areas not exposed to UV light. Some commonly used light coloured timber species used internally where this may be an issue are Kaihikatea, Radiata Pine, Hoop Pine, Cyprus and Douglas Fir (list not exhaustive). We have a copper-free product called CUTEK® Euro (available by special order) which is extensively used as an alternative to CUTEK® Extreme CD50 in these instances. For more information regarding this option, please contact our friendly technical support team who will be able to assist you with your project.

To determine if CUTEK® Extreme CD50 or CUTEK® Euro is appropriate for your timber, order your free sample here or contact us for further advice.

How to apply

Before you protect

Before you begin, note the hazards and precautions on this website and the can labelling, and ensure that you use the correct safety equipment as detailed in the Safety Data Sheet.

Weather

Once applied, CUTEK® Extreme CD50 generally requires 2-3 days of dry conditions after coating to facilitate full penetration/diffusion and an even colour finish; so check your weather forecast before coating.

Colourtone

Clear, un-tinted CUTEK® Extreme CD50 will allow your wood to naturally lighten/silver/grey when exposed to sunlight while retaining its protection characteristics. Unless you want a clear finish that will naturally lighten/silver/grey off in a few months, it is important to mix in CUTEK® Colourtones to your can of oil before use. Adding a CUTEK® Colourtone provides UV colour protection and slows the lightening/silvering process.

To choose which Colourtone suits your timber and project, visit our Colourtone page.

Note: CUTEK® Extreme CD50 diffuses deeply into your timber and will continue to provide moisture protection and improve dimensional stability even if a CUTEK® Colourtone is not added and your wood becomes weathered and greyed.

Application

After preparing your timber, it will need to be completely dry prior to coating with CUTEK® Extreme CD50. It is very important that your timber is clean, non-greasy and dry with a moisture content of less than 17%. It is also very important that the surface of the wood is free from chemical residues and is not exposed to environmental contaminants such as dusts while CUTEK is drying.

Stir the CUTEK® Extreme CD50 oil thoroughly (with the added CUTEK® Colourtone if desired) before and during use. Make sure you stir from the bottom of the can to ensure active ingredients are properly mixed throughout the oil.

Apply thin, even coats with a brush, paint pad or lambswool applicator. CUTEK®’s DeckBoss brush is a good option. CUTEK® Extreme CD50 works best when applied as a THIN COAT – two or three thin coats on finished wood and hardwoods are much better than one or two thick coats. For best results, ONE coat of CUTEK® Extreme CD50 should be applied to all faces of the wood prior to installing, with a SECOND coat applied to the top surface once the first coat has completely penetrated/diffused.

Drying time

Unlike traditional wood coatings, CUTEK® Extreme CD50 needs to penetrate/diffuse deeply into your timber. After coating, CUTEK® Extreme CD50 will slowly migrate into your wood to repel moisture, improve dimensional stability and lengthen the service life of your timber. This penetration/diffusion process varies in time for many reasons including differences in timber type (species, density, porosity, age of timber and residual moisture content) as well as environmental factors (temperature, humidity, weather).

Sometimes this drying process can take several days to complete. You will know when your timber is ready for a recoat of CUTEK® Extreme CD50 when it is completely dry and non-greasy. Please note the second coat of CUTEK® Extreme CD50 will take longer to migrate into your timber than the first coat.

Clean-up

Equipment (including brushes) may be cleaned with turps or soap and water. If not correctly cleaned or disposed of, oily rags and other oily materials may cause combustion fires. After use you MUST immediately spread out all oily material outside to dry, by flattening them out to their full size in an airy spot at temperatures above 4 degrees Celsius, or wash them thoroughly with water and detergent and rinse. Remove all oil from all clothes, tools, rags and any other materials contacted during use or as a result of an accidental spill. Ensure wash water is disposed in accordance with local regulations.

Coverage

  • New hardwoods dressed 10–20m2/litre
  • Old restored timber dressed 7–9m2/litre
  • New timber rough sawn 7–9m2/litre
  • Old restored timber rough sawn 4–7m2/litre
  • Shingles and shakes 2–5m2/litre

These figures represent typical averages for common decking and cladding timber species and are to be used as a guideline only.

Maintenance

With CUTEK® oils, maintenance is simple, fast, and cost effective. CUTEK® Extreme CD50 will not crack, peel or split, and your wood can be easily rejuvenated or restored using our Prepare and Protect system – no need to sand or strip.

CUTEK® Extreme CD50 should be reapplied when the wood is no longer beading water, or as frequently as necessary to retain the natural beauty and colour of the wood.

Due to the accumulative effect of CUTEK® Extreme CD50, generally each maintenance coat will use less oil than the previous coat. As the protective properties build up inside the timber, the time between when re-coats are required can extend.

Typically, horizontal exterior wood surfaces exposed to full weather such as pool decks and handrails will require re-coating more frequently (initially after 6 months, then annually), while other surfaces such as vertical rough-sawn cladding will need recoating less often.

SKU: cutek-e-1
Visit Website

About the
Seller

CUTEK® is a powerful wood protection system… but is also so much more than that. CUTEK® timber oils offer powerful protection while enhancing the natural beauty of timber. CUTEK® timber oils diffuse deeply into timber to repel moisture, maintain structural integrity and ensure the longest possible service life.

What sets CUTEK® oils apart is their ‘self-healing’ action. Once diffused, CUTEK® oils remain permanently mobile in the timber actively driving out moisture to minimise cupping, warping and splitting, even after being cut or perforated with fasteners. CUTEK® penetrating oils have a 30-year proven track record of standing up to our New Zealand climate and other harsh environments around the world.

At ArchiPro we recognise and acknowledge the existing, original and ancient connection Aboriginal and Torres Strait Islander peoples have to the lands and waterways across the Australian continent. We pay our respects to the elders past and present. We commit to working together to build a prosperous and inclusive Australia.