Clelands Timber Flooring and Panelling

Option 1

• Nominal size: 100 x 25mm
• Finish size: 90 x 18mm

Option 2

• Nominal size: 150 x 25mm
• Finish size: 135 x 18mm

Finishing options

Pre-primed option

Our primer is a machine-coated alkyd oil-based primer designed as an adhesion coat for the next coat of paint. This primer does not waterproof the timber but does slow water uptake.

Radiata Pine contains tannin which can cause paint to turn brown. Our primer blocks the migration of the tannin into the paint coating minimising the discolouration of the painted surface.

Treatment types

LOSP H3.1

LOSP H3.1 is an effective preservative designed to provide lasting protection for wood products used in external situations above the ground protecting against decay and insects. The timber is treated in the finished form which improves its dimensional stability.

This LOSP product comes with a 25-year guarantee against fungal decay and insect attack and is water repellent to reduce the general uptake of moisture.

CCA H3.2

CCA H3.2 is a waterborne, Chromated Copper Arsenate preservative system developed to provide long-term protection to wood exposed in exterior applications and is applied to wood by pressure treatment.

The CCA preservative is an effective fungicide and termiticide providing protection from a broad spectrum of decay fungi and wood-boring insects.

Grades available

Clear

Our highest quality grade is ideally suited for uses where a long length clear finish is required.

Due to its light colour and clean appearance, Clears grade requires a minimum of processing to achieve an excellent finish. Knot-free on one face and two edges.

Finger-jointed

Finger jointing results in much higher quality and stronger pieces and components, while dramatically reducing waste. The two most important advantages of finger-jointed lumber are straightness and dimensional stability.

Dressing grade

An excellent grade for use where clear boards do not provide enough natural character.

The dressing grade still has a fine appearance but features tight knots and small bark or resin pockets along the better face. Excellent recoveries are achievable as this grade can be used in its entirety.

Knots will be live on the best face and less than 1/2 of the width. Cone holes may be present in the occasional piece.