OnmiCare Electric Shower

• Ideal size and shape for replacement installations
• Rub clean shower head with five different spray patterns
• Stylish riser rail kit with adjustable fixing brackets
• Push button Start/ Stop to select your favourite shower setting every time
• Swing-Fit™ – Terminal for left and right cabling
• Swivel-Fit™ – A 180° fully reversible swivel water inlet that accommodates water connections from either the left or right hand side of the unit to aid installation

The OmniCare Electric Shower heating elements located in the main unit operate at a constant rate at your chosen power setting. The rate of the water passing through the heater determines the water temperature. The slower the flow the hotter the water becomes; the faster the flow, the cooler the water.

During winter the mains water supply will be cooler than in summer, so the flow rate will vary between seasons at any one temperature setting.

Therefore at different times of the year you may have to adjust the position of the temperature control/dial to maintain your desired water temperature.

Only connect unit to a 230v – 240v AC supply. The electrical supply must be adequate for the loading of unit and existing circuit. The shower must be connected to its own independent electrical circuit. An isolation valve must be fitted in a convenient position in the supply pipe to allow the shower to be serviced.

Installing a continuous flow electric shower is the perfect solution for remote bathrooms and situations where there can be unpredictable demands for hot water, making them ideal for baches, offices and sports clubs.

With Triton electric showers, water is heated instantly on demand, so you’ll never run out of hot water and you’ll only pay for what hot water you use.

There’s no need for a hot water cylinder and long runs of pipe which can waste water and result in heat losses. Therefore there is no stored water, saving on precious space and improving the affordability even further.

Download Brochure