Rinnai Novo Freestander - Cabinet Variant

Temperature control:
Back-to-basics simple infra-red remote makes operation easy and stress-free, or upgrade to mobile app control with the optional Wi-Fi module kit. ($246 RRP)

Heating areas (up to):

• Upper North Island: 112 m2
• Central and lower North Island: 77 m2
• South Island: 65 m2

Gas type: Available for Natural Gas or ULPG, specify at the time of purchase

Data plate: Lower right hand side of the base panel (in front on the gas control)

Convection fan: 120 V AC 50 Hz 2-speed centrifugal blower

Gas connection: Brass ½ ” BSPT male fitting. The gas supply terminates inside the unit—lower RHS of the appliance.

Ignition: 230-240 V AC 50 Hz high voltage electronic spark

Installation considerations: Room size, smaller rooms will heat up quickly, and due to the heat of the appliance, the fire will turn to a low setting once the set temperature has been reached.

Flue system: Direct vent coaxial flue. Draws air for combustion from the outside and expels combusted gases to the outside. Appliance must be installed with a Rinnai flue system.

Noise level: 37-45 dB(A)

Electrical: A 1.5 m power cord with a three pin plug is supplied. The power cord passes through a slot in the back left hand corner of the appliance.

Safety devices: Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detection.

Temperature control: Operated using a basic infra-red remote, or for more features such as timers and thermostatic control, by using a Wi-Fi module (purchased separately) and using the Rinnai Wi-Fi fireplace controller app.

Weight: approx 100 kg including base

Dimensions

• Viewable glass dimensions: 530 x 294 mm