Rinnai Novo Freestander - Plinth Variant

Novo Freestander - Plinth Variant

No-fuss replacement for a freestanding wood burner
Simple modern lines, a glowing log set and realistic flame picture. The Novo Freestander will bring ambience and warmth to those cold winter nights.

Choose from two base options, the cabinet or the plinth (this listing).

Price includes the engine and the base. Flueing not included, this must be ordered separately.

Temperature control
Back-to-basics simple infra-red remote makes operation easy and stress-free, or upgrade to mobile app control with the optional Wi-Fi module kit. ($246 RRP)

Heating areas (up to)
- Upper North Island: 112 m2
- Central and lower North Island: 77 m2
- South Island: 65 m2


Gas type: Available for Natural Gas or ULPG, specify at the time of purchase




Data plate: Lower right hand side of the base panel (in front on the gas control)




Convection fan: 120 V AC 50 Hz 2-speed centrifugal blower




Gas connection: Brass � " BSPT male fitting. The gas supply terminates inside the unit�lower RHS of the appliance.




Ignition: 230-240 V AC 50 Hz high voltage electronic spark




Installation considerations: Room size, smaller rooms will heat up quickly, and due to the heat of the appliance, the fire will turn to a low setting once the set temperature has been reached.




Flue system: Direct vent coaxial flue. Draws air for combustion from the outside and expels combusted gases to the outside. Appliance must be installed with a Rinnai flue system.




Noise level: 37-45 dB(A)




Electrical: A 1.5 m power cord with a three pin plug is supplied. The power cord passes through a slot in the back left hand corner of the appliance.




Safety devices: Flame failure sensing system, pressure relief, overheat safety switch, air temperature sensor, thermal fuse, overcurrent fuse, and spark detection.




Temperature control: Operated using a basic infra-red remote, or for more features such as timers and thermostatic control, by using a Wi-Fi module (purchased separately) and using the Rinnai Wi-Fi fireplace controller app.




Weight: approx 100 kg including base





Dimensions


Viewable glass dimensions: 530 x 294 mm








Optional Mesh frame ($370 RRP)
The Novo black mesh frame can be easily installed, no fixings required. It is designed to protect against touching the hot surface of the glass1.
The frame can be purchased as an accessory when ordering the Novo. Ideally the guard will be fitted during installation of the fire, but can also be retrofitted.



For more information, delivery prices etc. please contact the Heating department at Gatmans on Ph 0800 800 960 or via email at [email protected]