Spotted Gum Timber Veneer Panel A/B UV-Coated FOSB

Spotted Gum Timber Veneer Panel A/B UV-Coated 19x1220x2745mm is an FOSB panel overlaid with A/B crown-cut, randomly mismatched Spotted Gum veneer. The panel features a wire-brushed surface that introduces refined tactile texture and enhances the play of light across the timber grain. Supplied fully prefinished, the panels arrive ready for installation with no on-site sanding, staining, or coating required. The surface has high resistance to scratches and micro-abrasion. Made from sustainably sourced timber, it offers an environmentally responsible option for modern interiors.

Spotted Gum wood is one of Australia’s most recognised premium hardwoods, valued for its strength, density and distinctive natural grain. Biological species Corymbia Maculata, Corymbia Citriodora and Corymbia Henryi. Spotted Gum may also be referred to as Lemon-scented Gum or Spotted Irongum. Depending on its origin, it may also be identified as QLD Spotted Gum or NSW Spotted Gum.

Known for its attractive wavy grain, varied natural colour, and excellent durability, Spotted Gum is used in high-performance structural applications such as decking, flooring, joinery, and architectural interiors. Spotted Gum is a slow-growing Australian hardwood. Trees typically require around 30 to 45+ years to develop mature heartwood, natural durability and the density associated with this species. With a Janka hardness rating of approximately 11.0 kN, Spotted Gum is valued for demanding applications where strength, wear resistance and long-term performance matter.

Face veneer: crown-cut, randomly mismatched Spotted Gum veneer 0.5mm thick, wire-brushed.

Reverse veneer: downgraded randomly mismatched Spotted Gum veneer 0.5mm thick.

Coating: ultra-low VOC,low-sheenUV-hardened polyacrylate (6 coats).

Core: FOSB(Fine Oriented Strand Board) Poplar/Pine.

Glue: MDI glue (Methylene Diphenyl Diisocyanate adhesive), is a high-strength, moisture-resistant industrial adhesive. Known for enabling zero-added-formaldehyde composite wood products, it provides strong, permanent bonding performance suitable for a wide range of consumer, commercial and construction applications.

Applications: commercial fit-outs, cabinetry and joinery, feature walls and doors, wall lining, ceilings, premium residential interiors, premium RV interiors. Panels are not suitable for exterior use, wet areas with direct water exposure, or flooring. 

Density: 620 kg/m³

Panel weight:  19x1220x2745mm is 39.45 kg (11.78 kg/m²)

Emission Class: Australian E Super Zero

Appearance grade: face - A, reverse - B

Natural timber veneer colour and grain disclaimer

Timber is a natural material, and variation in colour, grain, texture, figure and tone is expected. Samples are provided as a general indication only and cannot represent the full natural variation of the supplied product.

The final panels supplied may, and likely will, differ from the sample in colour, grain pattern, contrast and overall appearance. This is not considered a defect, as each timber veneer sheet is unique and reflects the species' natural characteristics.