Metro Performance Glass

Kitchens:
Reinvent your kitchen using versatile ColourBak glass for designer splashbacks, cupboard doors, and kick plates. For a truly unique touch ask about decorative glass with your own choice of digitally-printed designs.

Bathrooms:
Create a stylish modern look with the latest glass shower liners, frameless showers, decorative glass, and mirrors to suit your space. With high-performance glass, you can create a bathroom that feels large and luxurious, customised to suit you space

Doors and Room Partitions:
Create a flexible living space using the unique aesthetic properties of glass to add appeal to your cavity sliders or dividing walls, with translucent, coloured or digitally etched designs. They’re easy to clean too.

Stairs and Balustrades:
Glass balustrades open up and extend areas while adding a contemporary feel to any home. Check out the possibilities with toughened safety glass to create a stylish but strong safety barrier.

Low E Double Glazing:
Because windows are a key design factor for the insulation of houses, Metro Performance Glass offers a range of window glass with high-tech coatings that create the optimum conditions inside. Allowing you to bring the outside in with large expansive windows.  Simply select the Low E double glazing that delivers the right level of performance and enjoy a more comfortable home. 

Commercial:
Metro Performance Glass are specialists in commercial projects, including glass façade design. With technical specialists in Auckland, Wellington, and Christchurch we have the expertise to assist in any commercial project large or small.

For more information on care and maintenance for frameless glass hardware, please visit the following link: Care & Maintenance (metroglass.co.nz)

Glass Care Installation Notes

• Check glass surface orientation before glazing.
• Use only recommended sealants.
• If splashes of mortar or plaster occur, immediately wash down with clean water or mild detergent. Do not allow splashes to harden. Do not use solvents.
• Clean glass carefully: use non-abrasive cleaners, mild detergents or propriety glass cleaners.
• Do not use scrapers on glass.
• Home owners should obtain a copy of Care and Maintenance Instructions from their window supplier.

Washing Glass

• The regular washing and drying of glass and window frames is required to ensure long term durability. In urban areas washing should be every 3 to 6 months.
• When washing, soak the glass surface with warm water and mild soap detergent solution to loosen dirt and debris or proprietary glass cleaners. Start cleaning at the top of the building and continue to lower levels.
• After washing, rinse with clean water and then dry the glass using a clean grit-free squeegee, cloth or paper towel and remember, 'Wet glass is dirty glass.'
• All water and cleaning solution residue should be dried from the window gaskets, sealants and frames to prevent water spots.
• Avoid cleaning tinted and reflective glass surfaces in direct sunlight.

Washing Special Glasses

• When washing double glazing and laminated glass use the same procedures as above but ensure no solvents come into contact with the edge laminate interlayer or unit sealant.
• It is advisable to check the frame drainage to ensure no water is trapped in the rebate as this can affect the life of these products.
• With reflective or Low E coated surfaces exercise special care when cleaning and follow the manufacturer's instructions.