Velvetina | Natural Materials
In the tradition of quality European lime plasters, Rockcote Velvetina is a strong, fine grained decorative plaster finish with a distinctive velvety appearance.
With less drama than Venetian Plaster, and harder drying characteristics than Otsumigaki, Velvetina is designed to produce a low lustre finish with a serene, natural look. It is particularly useful for finishes where a combination of lightly polished closed and coarser open areas is sought such as a bamboo effect finish.
Velvetina’s velvety allure works effortlessly in offices, reception areas, large feature walls in restaurants and homes, and bar faces.
- CategoryRender Plaster Systems
- RangeInterior
- BrandRockcote
- As a top coat, Rockcote Velvetina is suitable for interior use excluding wet areas.
- Ideal for use as a base coat for Rockcote Venetian Plaster.
Colour: Natural white. Can be tinted with oxides.
Finishes: Lustre or Smooth.
Undulations: Level, Lightly Undulating.
Rockcote Velvetina can be used as a two coat finishing system for interiors, delivering a smooth to low lustre finish. For best results, apply the first and second coats with a Venetian Trowel allowing 12 hours between coats and then polish using a Japanese Namikeshi stainless steel trowel. Flat patterns can also be achieved by the creative artisan.
This product cannot be used to achieve a high polished finish; if a super-high polished finish is sought, Rockcote Venetian Plaster should be used.
Features:
- Can be used as a base coat for Rockcote Venetian Plaster.
- Can also be used as a finish coat to create a smooth to lustre finish.
- A variety of patterns can be created depending on the skill of the applicator.
- Zero VOC.
Benefits:
- Intended as a base coat layer to address substrate imperfections, particularly over plasterboard or fibre cement sheet, in preparation for over coating with Venetian Plaster.
- Premixed product, just stir and apply.
Other products
in this range
About the
Seller
Rockcote is one of Australia’s most loved and trusted brands and manufacturer of cement and coloured Render, Textures, Paint and Natural Materials coatings. Rockcote has been around for over 40 years and understands the need of Australian architects and designers and works closely with builders, applicators, and painters to create products that perform exceptionally in Australian conditions.
Proudly Australian owned and operated, our factory is based on Queensland’s Sunshine Coast and our products can be found throughout Australia and New Zealand.
Whether for exterior or interior finishes, Rockcote’s reputation for quality and performance, combined with our company’s record of sustainability cannot be matched by our competitors.
- ArchiPro Member since2021
- LocationView address
- More information