HB1830 Key Locking Flush Bolt
The HB 1830 is a larger key locking version of the HB 1810 & 1820 Flush Bolts. This bolt is able to be key locked with a standard euro cylinder providing additional security for sliding doors and windows.
To accommodate a standard euro cylinder the body of the HB 1830 is significantly larger than its HB 1810 & 1820 counterparts. The bolt weighs approximately 1.3kgs and is ideally suited to large scale solid timber doors of at least 42mm thickness.
Bolts can be mounted to the top or bottom of doors depending on door detail. The cylinder position however will not change and therefore if the bolt is mounted to the top of the door the cylinder will appear ‘upside down.’
Ships with fixing kits and includes a standard 3pin Euro cylinder that sits flush with the face of the bolt (21mm from centre of cam to edge). Available in round bolt end only. Extension kits available separately.
- CategoryDoor Bolts
- BrandHalliday + Baillie
- Warranty5 years
More from
Halliday + Baillie
About the
Seller
- Products listed
Halliday + Baillie has been providing elegant handle solutions and architectural hardware products for over 25 years and designing and making their own hardware for almost two decades.
All our Halliday + Baillie products are proudly designed and manufactured in New Zealand. Support local and buy NZ-made!
Our design encompasses quality, flair, functionality, and longevity. Products are proudly produced in New Zealand, where lower volumes enable careful monitoring with high production quality. Handles may be turned a thousand times daily, so materials and finish are among the highest priorities. Longevity has become the undisputed hallmark of our success.
The range includes door hardware, sliding door hardware (including a full range of flush pulls, end pulls, locking and privacy sets etc), stair rail brackets, door stops, drawer and blind extrusions and wet area vents.
Halliday + Baillie architectural hardware products look good and feel good, and the team is continually striving for an aesthetic that will stand the test of time.
Besides our products, Halliday + Baillie is the exclusive New Zealand and Australia supplier for the German FSB range and the English Turnstyle Design Ranges of high-quality architectural hardware. Solid bronze, marine-grade stainless steel, and hand-stitched lever handles and knobs are just part of these extensive ranges.
- ArchiPro Member since2019
- LocationView address
- More information