In Slab Floor Heating
The ideal choice for heating polished concrete and also suitable for other floor finishes. Our in-slab heaters are designed to be secured onto the reinforcement grid. The slab is then poured on top. The heaters, in combination with our intelligent programmable thermostats, ensure heating efficiency and economical running costs. The concrete slab will retain and slowly release heat over an extended period of time, even once the heater is turned off.
- The Coldbuster in-slab underfloor heater is a bi-directional, single-ended 6mm cable, rated at 30W/m and supplied as a cable on a roll.
- Secure the cable along the reinforcement rods at 200mm spacing to achieve the required wattage per square meter.
- Heaters have a single 3m long cold tail lead that can be connected to a programmable or manual thermostat control.
- A range of 13 standard lengths or a combination of these lengths caters for all area sizes and shapes.
- CategoryUnderfloor Heating, Underfloor Insulation
- RangeFloor Heating
- DesignerColdbuster
- Warranty25 years
- Type of useCommercial and Residential
- Care and cleaningEasy maintenance
- Installation
- Easy self install
- Professional installation recommended
- Assembly
- Easy self assembly
- Professional assembly recommended
Included in each Underfloor Heating kit:
- In-Slab Underfloor Heater
- Installation Monitor (element alarm) with battery
- Installation Manual
- 25 Years Warranty
- Note: Thermostats sold separately
Basic Installation Instructions:
- It is recommended to install the in-slab underfloor heater with 200mm spaces between each run (matching typical reinforcement grid spacing) to achieve the correct wattage per square meter
- Plan heater layout before securing the heating to the reinforcement grid in order to ensure it will fit properly
- Secure the heater to the reinforcement grid using cable ties and cut the cable ties so they don’t stick up when the concrete is poured
- For more in-depth instructions, consult your instruction manual contained in every underfloor heater kit. Or you can always contact the friendly people at Coldbuster for further assistance!
- The Coldbuster in-slab underfloor heater is a bi-directional, single ended 6mm cable, rated at 30W/m and supplied as a cable on a roll.
- To achieve the required wattage per square meter, secure the cable along the reinforcement rods at 200mm spacing.
- Heaters have a single 3m long cold tail lead that can be connected to a programmable or manual thermostat control.
- A range of 13 standard lengths or a combination of these lengths caters for all area sizes and shapes.
- Teflon coated, 6.5mm thin, loose underfloor heating cable, supplied on a reel with a single 3m long cold tail
- 30W/lineal meter
Projects featuring
In Slab Floor Heating
Installers of
In Slab Floor Heating
About the
Seller
Coldbuster Floor Heating is the leading supplier of electric floor heating Australia-wide supplying a range of floor heating and related heating products to the trade, retail and DIY markets.
With over 27 years experience, we import and distribute only the best quality products manufactured by top international companies that invest substantial funds in new product Research and Development in consultation with Coldbuster, ensuring leading-edge technology.
Our products meet European quality standards and have ISO certification and USA Underwriters Laboratory listings. The products meet Australian standards regarding volatile organic compounds and electromagnetic radiation.
- ArchiPro Member since2023
- LocationView address
- More information