Screed Hydronic Floor Heating
Screed hydronic underfloor heating is ideal for large homes. This type of hydronic heating is very cost-efficient and far more flexible than conventional heating systems for large spaces.
Screed heating uses a wide range of heat sources and can have any floor covering on top, including polished concrete.
- CategoryUnderfloor Heating
- RangeHydronic Heating
Pipe Type: Cross-linked polyethylene pipe with oxygen barrier
Pipe Diameter: 16mm
Screed Thickness: Minimum 50mm
Pipe Warranty: 25 years
APPLICATIONS
Hydronic in-screed heating is suitable for large areas (80 m²+) and requires a sand and cement bed on top of the pipe. The minimum depth of the screed bed is 50mm. In-screed installations have a faster response time than in slab installations, as the pipe is closer to the floor surface.
PIPE TECHNOLOGY
REHAU PEX pipe is specifically used for underfloor heating. It is a cross-linked polyethylene pipe with an oxygen barrier to prevent corrosion.
HEAT OUTPUT
With in-screed hydronic heating, we aim for a heat output of 100-120W/m². A combination of flow and temperature is balanced to suit the heat load requirement of each area.
Hydronic floor heating pipe is installed on top of the subfloor, before the cement screed, and beneath any type of floor covering. You must cover the cable with a minimum of 50mm bed of screed.
The hydronic floor heating pipe is held on the floor by either plastic pins attached to 30mm insulation foam (R1 rating) or clipped to a light wire mesh. (An additional reinforcing mesh will need to be installed in the screed)
About the
Seller
- Products listed
- Recent Responsiveness
100%
Usually responds within
8 hours on weekdays
Comfort Heat Australia is a leading supplier of hydronic and electric underfloor heating systems. An Australian owned business, Comfort Heat offers comprehensive DIY kits and/or professional installation in both hydronic and electric systems. As heat naturally rises, no heat is wasted with underfloor heating systems. Comfort Heat Australia systems are gentle and low temperature, with no air movement, dust, noise or dry air.'
Comfort Heat stocks the full range of world leading hydronic and electric underfloor heating products to suit all your heating needs, for all floor coverings, both electric and hydronic.
Large industrial projects to small bathroom renovations or even a simple DIY kit, Comfort Heat has the solution for your heating requirements.
With over 25 years expertise in both electric and hydronic floor heating systems, Comfort Heat can provide the most effective and efficient heating solution for your project. From the superior twin conducting cable of the electric floor heating systems to the quality components used in hydronic systems, Comfort Heat has the commitment to design superior installations which meet the needs of their customers.
- ArchiPro Member since2022
- LocationView address
- More information