HB1270 Full Length Sliding Door Extrusion

Extending the Halliday + Baillie flush pull range to its fullest extent, the HB1270 provides a graphic statement on sliding timber doors.

Specs

Material : Extruded aluminium, available either in raw mill finished aluminium Raw extrusion can be powder-coated or custom finished by the client as required

Retaining grips: designed for mounting directly into routered door.

Minimum door thickness: If used back to back a door thickness of 55mm is recommended, or pulls can be offset on each side.

Features

Note : Full length extrusion is sold as 3-metre lengths only.

Please Note: This is a run-out product. There is limited stock available, and once sold no more will be made. Please contact your local Halliday & Baillie representative for stock and finish information.

For in stock lengths a minimum 10 working day ‘pick and pack’ time applies. If items are not currently in stock lead times can be 12+ weeks. Please contact your local Halliday + Baillie representative to confirm current lead times.

BULK ORDERS: For bulk commercial orders of the this profile where larger quantities are required of a consistent dimension, please contact us directly as customised lengths can be manufactured dependent on order size.

Scope of use

The HB1270 is designed for use on timber sliding doors where a full-height, integrated pull or edge detail is required. Supplied as a 3-metre aluminium extrusion to be cut to size, it is routered into the door to create a continuous flush pull that provides a sleek, minimal grip along the entire door height. Ideal for residential or commercial applications seeking a streamlined, architectural finish, the HB1270 is suitable for both single and paired installations depending on door thickness.