Enter the designer retractable insect screen/sun filter/blockout blind

The S4 system is ideal for but not limited to large sliding and folding doors and can be fitted to either the inside or the outside of the opening. In terms of installation, a single screen or blind can be installed that extends from one side of the frame and covers the full width of the opening. A single screen can span up to 1015 - 4697mm depending on the fabric type used.

A combination of two fabric types can also be installed, with one housed in a coil on each side of the frame. For example, an insect screen may be installed on one side with a sun filtering blind or block out blind on the other to use when required. 

Another configuration is known as ‘Double’, which offers two screens or shades in the same fabric option that meet at any point along the opening. Double insect screens allow a maximum of 9013mm wide openings. For other fabrics, this will be slightly less due to the thickness of material.

Cornerless screens or shades can also be designed to meet at a 90-degree angle opening, which allows for the ability to remove corner posts - something that traditionally could not have been achieved - but now the view is maintained without distraction. 

“The S4 system is incredibly unique in its offerings, not just in its capability to span up to nine metres of glazing without posts but for its flexibility and variety of configurations and screening types,” Russell says. 

The S4 system is primarily designed for inclusion at the design stage, however it can be retrofitted and surface mounted to either the inside or the outside of the frame, Russell says. “In the instance they are surface mounted, elements of the hardware will be visible on the frame. If they are specified at the design stage, all hardware is concealed within the frame for a stunning clean aesthetic.”

While the S4 system requires a frame on which to be mounted, it does not have to be a traditional window or door frame, Russell says. “This opens up the design possibilities for outdoor living, allowing designers the ability to specify these screens for spaces such as pergolas that could not previously have insect screens installed.”

“This system is entirely unique and unlike anything else available in New Zealand. The majority of insect screens installed over the last few years are of the magnetic variety, which are generally not easy to use and are not retractable when not in use. Similarly, pleated systems are another option but these have the disadvantage of distracting from views as pleats are visible when the screen is opened. The difference with this new technology is the ability to design multiple configurations as well as the flawless, uninterrupted views that are maintained when the screens are open.”

S4 screens are all made to order, with a licensed installation professional visiting the site to measure and quote. Once an order is made, the bespoke system is manufactured in Australia and delivered and installed by a licensed installer usually within six weeks. 

Find out more about the latest in designer insect screens from Unique Hardware S olutions